JSB Pellets

General club information
Bazza
Posts: 960
Joined: 05 Oct 2010, 08:23
Contact:

JSB Pellets

Postby Bazza » 27 Jan 2012, 19:51

Todd and I have found a supplier of JSB pellets, 8.4 grains at very reasonable rates. Todd put them through his EV2 and recorded velocities of between 1.2 and 2 feet per second. Dan Eley even says he has miked and weighed a whole tin of JSB's and confirmed their consistency. He now uses them straight out of the tin. It would seem that anything with Air Arms name on it (except TX200's of course!) are a bit suspect. However, I got fed up with picking out bent Air Arms pellets at ETL Sunday and just shoved them in, didn't seem to make any difference, perhaps it's all in the mind. Comments please on whether we order JSB's instead of Air Arms.

RONALDO
Posts: 131
Joined: 21 Mar 2010, 17:52
Contact:

Re: JSB Pellets

Postby RONALDO » 27 Jan 2012, 22:12

I am very interested in changing to JSB although I have not tried them yet,but going on results from other peeps and Todd doing tests on them I am certainly going to try them as stated by others we seem to throwing away as many Air Arms pellets as we shoot.RONALDO

User avatar
Andy
Site Admin
Posts: 912
Joined: 25 Feb 2010, 20:59
Location: Colchester
Contact:

Re: JSB Pellets

Postby Andy » 28 Jan 2012, 01:35

I have a tin of 4.52 and a 4.53 if people want to put a few through and see.
I found they fly the same as the AA's, with just less damaged ones.
I for one am sick of the amount of rejects of late in the AA tins.

User avatar
SteveC
Site Admin
Posts: 3744
Joined: 14 Mar 2010, 15:52
Location: Colchester
Contact:

Re: JSB Pellets

Postby SteveC » 28 Jan 2012, 01:40

If the wind isnt too mad on sunday Im trying out some JSBs. I have 3 sizes to try out. Im hoping theyll be ok as I intend on swapping to them as well. Intershoot do them for £70/sleeve.
Committee bloke. Daystate. :) TX200. :)
Hammerli. :) Anschutz, hmmm.
Image

Bazza
Posts: 960
Joined: 05 Oct 2010, 08:23
Contact:

Re: JSB Pellets

Postby Bazza » 28 Jan 2012, 10:29

Shall the club order a batch of 100 tins JSB's instead of the Air Arms. We are running low anyway.

User avatar
Andy
Site Admin
Posts: 912
Joined: 25 Feb 2010, 20:59
Location: Colchester
Contact:

Re: JSB Pellets

Postby Andy » 28 Jan 2012, 13:20

Bazza wrote:Shall the club order a batch of 100 tins JSB's instead of the Air Arms. We are running low anyway.


Shall we get some testing done first to see how people get on with them. 100 tins is a big order :shock:

GerryW
Posts: 3024
Joined: 27 Feb 2010, 19:36
Contact:

Re: JSB Pellets

Postby GerryW » 28 Jan 2012, 15:14

We've been running on JSB Exacts (red) 4.52 for ages, only got about half a sleeve left from the last lot, I get them for about £78 posted for 10 tins.
thinking that we may give the JSB Express (blue) a try at some point, slightly lighter at 7.8 grains (roughly the same as Falcon Acc +), but also more expensive at £8.95 a tin! :o

RONALDO
Posts: 131
Joined: 21 Mar 2010, 17:52
Contact:

Re: JSB Pellets

Postby RONALDO » 28 Jan 2012, 19:13

never seen so much interest in the "forum".Much munching I do declare.............J.S.B!

User avatar
Andy
Site Admin
Posts: 912
Joined: 25 Feb 2010, 20:59
Location: Colchester
Contact:

Re: JSB Pellets

Postby Andy » 28 Jan 2012, 21:32

GerryW wrote:We've been running on JSB Exacts (red) 4.52 for ages, only got about half a sleeve left from the last lot, I get them for about £78 posted for 10 tins.
thinking that we may give the JSB Express (blue) a try at some point, slightly lighter at 7.8 grains (roughly the same as Falcon Acc +), but also more expensive at £8.95 a tin! :o


I thought Falcons are 7.1 grains mate ?
I do hope so, they fly at 845 fps out of my TX :shock: :shock:

GerryW
Posts: 3024
Joined: 27 Feb 2010, 19:36
Contact:

Re: JSB Pellets

Postby GerryW » 29 Jan 2012, 23:36

I did say 'roughly', as I couldn't be bothered to get the tin out :lol:

Bazza
Posts: 960
Joined: 05 Oct 2010, 08:23
Contact:

Re: JSB Pellets

Postby Bazza » 30 Jan 2012, 11:56

The club has decided to buy a 100 tins of 4.52 JSB Exact which gets the price down a bit. We can still sell them on to members at a considerable saving, keeping them at the same price of Air Arms which is £7 a tin.

User avatar
SteveC
Site Admin
Posts: 3744
Joined: 14 Mar 2010, 15:52
Location: Colchester
Contact:

Re: JSB Pellets

Postby SteveC » 09 Feb 2012, 07:13

Has Todd got these sorted yet? :)
Committee bloke. Daystate. :) TX200. :)
Hammerli. :) Anschutz, hmmm.
Image

Bazza
Posts: 960
Joined: 05 Oct 2010, 08:23
Contact:

Re: JSB Pellets

Postby Bazza » 11 Feb 2012, 08:19

I understand, from Todd, that the factory have been on a shut-down recently. Typical, when we want them urgently!

User avatar
SteveC
Site Admin
Posts: 3744
Joined: 14 Mar 2010, 15:52
Location: Colchester
Contact:

Re: JSB Pellets

Postby SteveC » 11 Feb 2012, 08:46

Oh. Cock.
Committee bloke. Daystate. :) TX200. :)
Hammerli. :) Anschutz, hmmm.
Image


Return to “Club Announcements”

Who is online

Users browsing this forum: No registered users and 19 guests